Boost Energy Efficiency With Home Improvement Projects

In the Palm Beach, Florida, area our weather is definitely envied, except of course, when the hot weather hits. Taking steps to improve home energy efficiency helps you get greater benefits from your air conditioner. Many of these steps are affordable home improvements you can complete in no time. For others, working with a cooling expert will get you the best results.

The Attic

If you haven’t yet decided where to begin your home energy efficiency improvements, consider putting the attic at the top of your list. The summer sun beating down on the roof quickly raises the temperature in the attic. Without enough insulation to slow it down, all that accumulated heat will radiate into your air-conditioned rooms, making it harder keep your home cool.

Air leaks are the biggest source of heat transfer to and from the attic, so start your home energy efficiency improvements by sealing these leaks. You’ll find them around:

  • The attic hatch

  • Where the attic walls meet the floor

  • Around penetrations for wiring, pipes, and appliance vents

  • Dropped soffits over areas of dropped ceiling

  • Recessed lighting

The largest attic air leaks should be sealed first. Gaps of between 1/4 to 3 inches can be sealed with closed-cell polyurethane foam spray insulation. Gaps larger than this can be stuffed with fiberglass insulation before sealing. For cracks of 1/4 inch or less, acrylic latex caulk or another all-purpose caulk is usually enough. To seal metal surfaces, such as the flashing around the furnace flue, silicone caulk is a better choice.

Once you’ve air sealed thoroughly, consider boosting your attic insulation level. Your contractor will be able to determine what type and just home much insulation will be needed.

Laying fiberglass batts in the attic is a relatively easy DIY option for improving your home energy efficiency. Loose-fill (blown-in) cellulose insulation is another possible choice. This product is made of small pieces of insulation that fill cracks and crevices more thoroughly than batts, creating a more efficient heat barrier. To install it, however, you’ll need a blower machine.

Improve Ducts for More Efficient Cooling

Your home’s air ducts are a critical part of the HVAC system. Because the furnace and A/C depend on the ducts to distribute conditioned air, duct problems reduce the efficiency of the entire system. By improving ducts, you’ll enjoy more even, comfortable temperatures throughout your home, as well as lower energy bills.

Air leaks are the number one way ducts lose energy. Cracks, gaps, and holes in the ducts let heated air escape in winter and let out air conditioned air in summer, raising the demand on your heating and cooling system.

These duct leaks also let in air contaminants such as dust, mold spores, fumes from stored chemicals, and even insulation fibers. In winter, warm air escaping from your ducts into the attic, crawl space or another unconditioned area can cause condensation that leads to rot and mold growth.

To stop ducts from leaking, ensure all ductwork connections fit tightly together. This includes connections to the air handler and registers, as well as between sections of ductwork. Then seal these connections with mastic. Consult a heating and cooling technician who can bring equipment to assess the extent of the duct leakage and check for debris buildup.

Uninsulated ducts that run through unconditioned spaces can lose energy. For example, in winter, a cold attic will cool down the heated air in the ducts so less warmth reaches your rooms. Boost duct efficiency by insulating them with a layer of duct wrap insulation or fiberglass batts.

Let Walls Surround You With Comfort

The walls of your home could be reducing your home’s energy efficiency in the same way as leaky doors and windows. Walls can leak air from many points, including:

  • Crown molding and baseboards

  • Electrical outlets and switches

  • Penetrations for utility lines

  • Penetrations for exhaust fans and appliance vents

You can find these leaks the same way you find leaks around doors and windows, then use caulk to seal leaks of 1/4 inch or smaller. Foam spray insulation can be used for leaks of 1/4 to 3 inches.

Even if well-sealed, walls can still cause your home to lose or gain heat if they’re not well insulated. Because assessing the insulation in your walls is difficult without special equipment, consider contacting a heating and cooling technician for a home energy audit.

During an energy audit, the technician will take infrared photos of your home to find areas of heat loss that would benefit from more insulation. Using loose-fill insulation will let you add needed insulation to your walls without having to open large sections of walls.

Improving Energy Efficiency in the Basement and Crawl Space

Upgrading your basement and crawl space will not only improve your home’s total home energy efficiency but also keep the floors warmer in winter. In the basement, your first step is to seal leaks as you did in the rest of your house. Penetrations for utility lines and appliance vents are frequent sources of air leaks in the basement.

The next step is to insulate the rim joists at both ends of the basement. Cut rigid foam insulation into strips, then into sections that will fit against the rim joists between the floor joists. Finally, apply caulk to the edges of each section of rigid foam to seal them into place and prevent air leaks.

For insulating crawl space walls, rigid foam insulation is one of the best options. This type of insulation helps control the humidity issues that often occur in crawl spaces. Once you’ve insulated the walls, lay a sheet of polyethylene on the crawl space floor and part-way up the walls to create a vapor barrier that further controls humidity. The plastic sheeting can be secured to the wall with foam spray insulation.

Contact Preferred Air Conditioning & Mechanical, LLC at (561) 202-1422 for more information about improving home energy efficiency.

Image provided by Shutterstock

You May Also Like

Heat Pump Compressor
December 14, 2024

Is My Heat Pump Compressor Malfunctioning?

Your heat pump’s compressor is perhaps its single most important component. Any malfunctions will undermine the entire system’s ability to perform heat… Continue Reading Is My Heat Pump Compressor Malfunctioning?

Read More…

HVAC Contractor Repairing Furnace
November 28, 2024

3 Questions to Ask When Choosing an HVAC Contractor

Whenever you request any kind of HVAC work, the results of your decision can have significant consequences for your wallet and comfort.… Continue Reading 3 Questions to Ask When Choosing an HVAC Contractor

Read More…

Experiencing HVAC Thermostat Problems
November 11, 2024

Is Your Old Thermostat Causing HVAC Problems?

Stubbornly clinging to an outdated thermostat will only subject you to a series of totally avoidable HVAC problems. Homeowners in Boca Raton,… Continue Reading Is Your Old Thermostat Causing HVAC Problems?

Read More…

Compliance Settings
Increase Font Size
Grayscale
Simplified Font
Underline Links
Highlight Links
Reset
Close